Vetus
Call for current pricing! 1-800-767-7606
- Bow and Stern Thrusters (20)
- Control Panels (24)
- Pumps (12)
- Tanks (2)
- Hydraulic Load Sensing and Control Devices (9)
- Electric Power Packs (1)
- Anchor Windlasses (12)
- Bow Rollers (4)
- Remote Controls for Hydraulic and 12V or 24V Electric Anchor Windlasses (41)
- Steering (51)
- Rudders (7)
- Hatch Lifters (2)
- Windscreen Wipers (20)
- Clear View Screens (1)
- Seating (13)
- Batteries (43)
- Indicators/Dials/Counters (9)
- Compass (3)
- Combi 4 (2)
- Sani-Processor (2)
- Electric Marine Toilets (4)
- Waste Water (15)
- Rigid Tanks (13)
- Hoses (10)
- Fittings (40)
- Lubricants/Coolants (7)
- Flexible Water Tanks (2)
- Ventilators (28)
- Hatches (22)
- Portholes (26)
- Portlights (1)
- Cooling Water Strainers (9)
- Water Separators/Fuel Filters (9)
- Boat Security Systems (2)
- Air Suction Vents (7)
- Flexible Engine Mountings (13)
- Flexible Couplings (10)
- Exhaust Assemblies (1)
- Waterlocks (19)
- Exhaust Systems (79)
- Propellers (73)
- Anodes (24)
- Acoustic Materials (1)
- Heaters and Accessories (4)
- Splash-Stop and Security for Fuel (4)
| Showing 723 results | |
|---|---|
 |
VETUS "Follow-up" Steering System
|
|
Specifications:
16 channels
combined sensor for compass and GPS
NMEA0183 interface
Resolution: 0.1degrees
Watertight to IP 66
Angle of inclination compensation a...
|
|
VETUS Batteries, Type AGM:
are supplied ready to use
have a very long lifespan
have a very low self-discharge rate
require no maintenance other than charging
...
|
|
VETUS 108 Ah Maintenance-Free Batteries
|
|
VETUS 120 Ah Maintenance-Free Batteries
|
|
VETUS Batteries, Type AGM:
are supplied ready to use
have a very long lifespan
have a very low self-discharge rate
require no maintenance other than charging
...
|
|
VETUS 143 Ah Maintenance-Free Batteries
|
|
VETUS Batteries, Type AGM:
are supplied ready to use
have a very long lifespan
have a very low self-discharge rate
require no maintenance other than charging
...
|
|
VETUS 165 Ah Maintenance-Free Batteries
|
|
VETUS 200 Ah Maintenance-Free Batteries
|
|
VETUS Batteries, Type AGM:
are supplied ready to use
have a very long lifespan
have a very low self-discharge rate
require no maintenance other than charging
cann...
|
|
VETUS 225 Ah Maintenance-Free Batteries
|
|
VETUS 55 Ah Maintenance-Free Batteries
|
|
VETUS Batteries, Type AGM:
are supplied ready to use
have a very long lifespan
have a very low self-discharge rate
require no maintenance other than charging
...
|
|
VETUS 70 Ah Maintenance-Free Batteries
|
|
VETUS 90 Ah Maintenance-Free Batteries
|
|
VETUS AB16B Stainless Steel Breather Nipples (AISI 316)
|
|
VETUS AB16S Stainless Steel Breather Nipples (AISI 316)
|
|
VETUS AB19B Stainless Steel Breather Nipples (AISI 316)
|
|
VETUS AB19S Stainless Steel Breather Nipples (AISI 316)
|
|
VETUS AB19SL Stainless Steel Breather Nipples (AISI 316)
|
|
VETUS AB25B Stainless Steel Breather Nipples (AISI 316)
|
|
VETUS AB38B Stainless Steel Breather Nipples (AISI 316)
|
|
VETUS ACCUSCH Battery Selector Switch
Dimensions: 5 5/16" X 5 5/16" X 3"
Capacity at 6-12-24 or 32 Volt
Continuous: 175 A - interval: 300 A
|
|
VETUS Adjustable Seat Leg
|
|
VETUS Adjustable Seat Leg With Gas-Filled Cylinder
|
|
VETUS Adjustable Seat Leg with Gas-Filled Cylinder
|
|
VETUS Adjustable Table Leg
This leg requires 13" space under the floor
|
|
VETUS Admiral Boating Seat
|
|
VETUS AFST1512D Make/Break Relay
|
|
VETUS AFST1512S Make Relay
|
|
VETUS AFST324D Make/Break Relay
|
|
VETUS AFST324S Make Relay
|
|
VETUS AFST624D Make/Break Relay
|
|
VETUS AFST624S Make Relay
|
|
VETUS AFSTG Watertight Remote Control Foot Switch
|
|
VETUS AFSTFR Watertight Remote Control Foot Switch
|
|
If the injection point of the cooling water line into the exhaust is situated at a height of less than 6" above the waterline, the when the engine is stopped, there is a risk that ...
|
|
If the injection point of the cooling water line into the exhaust is situated at a height of less than 6" above the waterline, the when the engine is stopped, there is a risk that ...
|
|
If the injection point of the cooling water line into the exhaust is situated at a height of less than 6" above the waterline, the when the engine is stopped, there is a risk that ...
|
|
If the injection point of the cooling water line into the exhaust is situated at a height of less than 6" above the waterline, the when the engine is stopped, there is a risk that ...
|
|
If the injection point of the cooling water line into the exhaust is situated at a height of less than 6" above the waterline, the when the engine is stopped, there is a risk that ...
|
|
VETUS AIRVH38 Anti-Siphoning Breather Kit
|
|
Hydraulic motor: reversible
Capacity hydraulic motor (cu.inch/rev): 0.5
Maximum operating pressure, psi: 1450
Maximum intermittent motor speed: 2440
Chain speed at ...
|
|
VETUS Ajax Electric Anchor Windlass
|
|
Hydraulic motor: suitable to operate in both directions
Capacity hydraulic motor (cu.inch/rev): 0.5
Maximum operating pressure, psi: 1450
Maximum intermittent motor speed: 24...
|
|
VETUS Alexander III Electric Anchor Windlass
|
|
Recommended for use on vessels which mostly cruise on inland (fresh) waters.
|
|
Recommended for use on vessels which mostly cruise on inland (fresh) waters.
|
|
Recommended for use on vessels which mostly cruise on inland (fresh) waters.
|
|
Recommended for use on vessels which mostly cruise on inland (fresh) waters.
|
|
Recommended for use on vessels which mostly cruise on inland (fresh) waters.
|
|
Recommended for use on vessels which mostly cruise on inland (fresh) waters.
|
|
Perfectly suitable for toilets which are installed below the waterline and for the discharge lines of waste water tanks.
|
|
VETUS Atlantic Boat Seats
|
|
VETUS AW Panel
|
|
VETUS BATBOX Battery Boxes
|
|
VETUS BATC Battery Cables
|
|
VETUS BATCC Cable Tags for Battery Cables
|
|
VETUS BATSW 100 Battery Main Switch
|
|
VETUS BATSW 250 Battery Main Switch
|
|
VETUS BATSW 600 Battery Main Switch
|
|
VETUS BATSW 75 Battery Main Switch
|
|
VETUS BATT Battery Terminal Sets
|
|
VETUS BC12202A 12 Volt Battery Charger
(20 Amps - 12 Volt)
|
|
VETUS BC12263A 12 Volt Battery Charger
(26 Amps - 12V)
|
|
VETUS BC12403A 12 Volt Battery Charger
(40 Amps - 12V)
|
|
VETUS BC12603A 12 Volt Battery Charger
(60 Amps - 12 V)
|
|
VETUS BC12803A 12 Volt Battery Charger
(80 Amps - 12 Volt)
|
|
VETUS BC24303A 12 Volt Battery Charger
(26 Amps - 12 V)
|
|
VETUS BC24303A 12 Volt Battery Charger
(30 Amps - 24 Volt)
|
|
VETUS BC24503A 24 Volt Battery Charger
(50 Amps - 24V)
|
|
VETUS BC24803A 24 Volt Battery Charger
(80 Amps - 24V)
|
|
VETUS BC Panel
This remote control panel may be connected to all battery chargers shown on this page. The panel has the following functions and indications:
On/off switch fo...
|
|
VETUS BCS1245 Battery Charger/ Battery Splitter
1. Combined Battery Charger/Battery Splitter
2. Alternator
3. Batteries
4. Shore Supply
5. Remote Control Panel
|
|
Black/Silver Plastic Housings with Black Metal and Plastic Levers
|
|
Black/Silver Plastic Housings with Black Metal and Plastic Levers.
|
|
Black/Silver Plastic Housings with Black Metal and Plastic Levers
|
|
VETUS marine hoses fulfill all current legislation for use on board. On
top of that, they are highly flexible and resistant against a variety
of internal or external influences.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydraulic bow thruster panel with on/off switch and two step joystick for operation at half power or full power. Watertight to IP 65.
|
|
Hydraulic bow and stern thruster panel with on/off switch and twin two step joysticks for operation at full or half power. Watertight to IP 65.
|
|
Suitable for a combination of bow thruster and stern thruster.
|
|
Built in time lapse device when reversing the direction of rotation.
Automatic switch off after 30 minutes inactivity.This feature is user selectable during ...
|
|
Protected against accidental or unauthorized operation.
Panel power on indicator.
Warning LED and buzzer in the event of continuous running for more th...
|
|
Suitable for either one bow thruster or one stern thruster.
|
|
Built in time lapse device when reversing the direction of rotation.
Automatic switch off after 30 minutes inactivity.This feature is user selectable during in...
|
|
Protected against accidental or unauthorized operation.
Panel power on indicator.
Warning LED and buzzer in the event of continuous running for more than 2 minute...
|
|
Hydraulic bow thruster two step joystick for operation at half power (no panel). Watertight to IP 65.
|
|
Suitable for either one bow thruster or one stern thruster.
|
|
Built in time lapse device when reversing the direction of rotation.
Automatic switch off after 30 minutes inactivity.This feature is user selectable during ...
|
|
Protected against accidental or unauthorized operation.
Panel power on indicator.
Warning LED and buzzer in the event of continuous running for mo...
|
|
VETUS BS125 Battery Splitter
VETUS Battery Splitters are suitable for 12 and for 24 volt installations, and for 2 or 3 battery banks. The maximum charging current is 125 A
|
|
VETUS BTANK Rigid Waste Water Tanks
These tanks are provided with ISO 8099 identification
These VETUS tanks are made in 9 different shapes and sizes, with contents of about ...
|
|
VETUS BTKIT Connection Kit
|
|
VETUS BV Stainless Steel Ball Valves
|
|
Bronze Ball Valves
|
|
VETUS BW312A Battery Watch
|
|
VETUS Bypass Valve
|
|
VETUS CAP Stainless Steel Deck Entries w/ Watertight Covers
|
|
A capstan is a rotating drum winch, usually fitted to the top of a larger anchor windlass, to handle rope. With its own integral hydraulic motor, this VETUS capstan functions as an...
|
|
VETUS Captain Boating Seat
|
|
VETUS CAPWC38 Deck Plates
|
|
VETUS Caribbean Boat Seats
|
|
VETUS CCFB Remote Control Panel for Napoleon Anchor Windlass
|
|
VETUS CCHOSE Heating and Cooling Hose
|
|
In addition, a programmable cut-out may be set, so that the windlass will stop automatically as the anchor arrives at the bow roller.
|
|
Central Control Unit
|
|
Specifications:
Speed range between 1 and 52 knots, with indication of a maximum and average speed. Read out in kilometers/hour or nautical miles/hour (knots).
Reading ...
|
|
VETUS Commodore Boating Seat
|
|
Hydraulic motor: suitable to operate in both directions
Capacity hydraulic motor (cu.inch/rev): 0.5
Maximum operating pressure, psi: 2625
Maximum intermittent motor ...
|
|
VETUS Condor Electric Anchor Windlass
|
|
VETUS Connection Sets for Double-Walled Water Heaters
*A connection set and a 120-volt - 1000 watt electrical heating element are supplied with the VETUS Double-Walled Water Hea...
|
|
Cooling Water Strainer.
|
|
Cooling Water Strainer.
|
|
Cooling Water Strainer.
|
|
Cooling Water Strainer.
|
|
Cooling Water Strainer.
|
|
Cooling Water Strainer.
|
|
Cooling Water Strainer.
|
|
Cooling Water Strainer.
|
|
VETUS Copper Tubing
|
|
Creates additional mixing of the water inside the exhaust line.
|
|
Creates additional mixing of the water inside the exhaust line.
|
|
Creates additional mixing of the water inside the exhaust line.
|
|
Creates additional mixing of the water inside the exhaust line.
|
|
Creates additional mixing of the water inside the exhaust line.
|
|
Creates additional mixing of the water inside the exhaust line.
|
|
Creates additional mixing of the water inside the exhaust line.
|
|
Diesel Generator Sets.
|
|
Diesel Generator Sets.
|
|
VETUS DON316R Stainless Steel Cowl Ventilators
|
|
VETUS DON316WR Stainless Steel Cowl Ventilators
|
|
VETUS DONALD2 Cowl Ventilators
|
|
VETUS DONALDS Plastic Cowl Ventilators
|
|
VETUS DOORB Brass Skin Fittings
|
|
VETUS DOORN Delrin (White) Through-Hose Fittings
|
|
The double-walled VETUS water heaters have a heating surface which is 5.7 times greater than a conventional heating spiral. This means that the fresh water will heat up 5-7 times f...
|
|
VETUS Drinking Water Tanks
|
|
Dual Station Units Type DS
|
|
Dual Station Units Type DS
|
|
Dual Steering Position
Two steering pumps with built-in non-return vaves. Alternatively: two steering pumps without non-return valves, in which case a separate dual non-return val...
|
|
VETUS marine hoses fulfill all current legislation for use on board. On
top of that, they are highly flexible and resistant against a variety
of internal or external influences.
|
|
VETUS EBV Remote Controlled Ball Valves
|
|
Specifications:
Display of magnetic course
Display of true course
Resolution: 0.5 degrees
NMEA 0183 interface
Internal illumination
Watertight to IP 65
Supplied wi...
|
|
Specification:
Large read-out of: Magnetic course or True course, GPS course
Smaller read-out of: GPS information including trip counter, log and boat speed (using GPS infor...
|
|
VETUS EHPA/B/C Electro-hydraulic Pump
|
|
VETUS EHPD/E Electro-hydraulic Pump
|
|
Electronic Engine Remote Control
|
|
VETUS EMP133 Waste Water/ Bilge Pump
|
|
Easy Docking Panel
Built-in time lapse device when reversing the direction of rotation.
Automatic switch off after thirty minutes inactivity. This feature is user selectable...
|
|
Built in time lapse device when reversing the direction of rotation.
Automatic switch off after 30 minutes inactivity.This feature is user selectable during inst...
|
|
VETUS FCAPDF38 Deck Plates
|
|
VETUS FCAPDF50 Deck Plates
|
|
VETUS FCAPWATER Deck Plates
|
|
VETUS FFHOSE Fuel Filling Hose
|
|
VETUS Fixed Seat Leg
|
|
An invaluable accessory for both motor and sailing boats
Connection Deck Entry: O 1 1/2"
Filler hose connection: O 1 1/2" and O 2"
Breather connection: O 5/8"
|
|
An invaluable accessory for both motor and sailing boats
Connection Deck Entry: O 1 1/2"
Filler hose connection: O 1 1/2" and O 2"
Breather connection: O 5/8"
|
|
An invaluable accessory for both motor and sailing boats
Connection Deck Entry: O 2"
Filler hose connection: O 2"
Breather connection: O 1"
|
|
VETUS FT Angled Fittings
|
|
VETUS Diesel Fuel Tanks are manufactured of linear polythene. They are much less likely to explode than metal tanks and there is no possibility of rust formation. The fuel level ca...
|
|
VETUS FTKIDB Connection Kit for Diesel Fuel Engines
|
|
VETUS FTKITA Connection Kit for Diesel Fuel Tanks
|
|
VETUS FTKITC Connection Kit for Diesel Fuel Tanks
|
|
VETUS Twin Fuel tank installation is possible with the FTKITD Interconnection kit
|
|
VETUS FU1224 Control Box
|
|
Installation of this safety device is very simple
No dismantling is required
The synthetic packing material is also used to insert the device
Suitable for hoses with inte...
|
|
VETUS FUHANDLE Fixed "Follow-up" Control Handle
|
|
VETUS marine hoses fulfill all current legislation for use on board. On
top of that, they are highly flexible and resistant against a variety
of internal or external influences.
|
|
VETUS FUREM Hand Held "Follow-up" Control
|
|
VETUS Fuse Holders
|
|
VETUS GASSP Gas Struts
|
|
VETUS GD1000 Gas Detection and Control System
|
|
Escape, Deck and Ventilation Hatches
|
|
Escape, Deck and Ventilation Hatches
|
|
Escape, Deck and Ventilation Hatches
|
|
Escape, Deck and Ventilation Hatches
|
|
Technical Specifications:
Available in 12 or 24Volt DC or 230 Volt/50Hz or 120 Volt/Hz
Nominal power consumption: approx. 340 W (12V), 350 W (24V),600 W (120V), 250 W (230V)...
|
|
VETUS HA1338 Hose Pillars
|
|
VETUS HA3060 Hose Pillars
|
|
This wall mounted toilet provides a solution where floor space is at a premium and enables toilet installation where a floor standing model would be impractical.
|
|
The wiping angle of this wiper is fully adjustable between 62 and 92 degrees, because of which the optimum wiping surface may be determined for each specific window size. All compo...
|
|
VETUS HDS Screenwasher
|
|
VETUS HDSLKL "Heavy Duty" Hose Clamps
|
|
VETUS Heating Elements for VETUS Double-Walled Water Heaters
*A connection set and a 120-volt - 1000 watt electrical heating element
are supplied with the VETUS Double-Walled Wa...
|
|
VETUS HELM Aluminum Rudder Arms
|
|
Bronze rudder gland for 30 or 40 mm rudder stocks. Available with 2 different lengths.
|
|
Bronze rudder gland for 30 or 40 mm rudder stocks. Available with 2 different lengths.
|
|
VETUS HF15 Oil
|
|
VETUS HHCS Stainless Steel "Heavy Duty" Hose Clamps
|
|
VETUS HHOSE Nylon Hose
|
|
VETUS HP Stainless Steel Hose Pillars
|
|
VETUS HPB Bronze Hose Pillars
|
|
VETUS HPM Brass 90 Degree Hose Pillars
|
|
VETUS HS (Separate Dual Non-Return Valve) Non-Return Valve
|
|
VETUS HS1000 Telescopic Steering Wheel Adjuster
|
|
Tanks differ in compatibility for number of hydraulic devices required.
|
|
Hydraulic tank for one pump and four hydraulic devices plus hydraulic power steering.
|
|
Single step load sensing device. Gives zero to full flow rate, depending on whether a load is sensed or not. Used for e.g. bow and stern thrusters.
|
|
Duel step load sensing device. Gives zero partial, or full flow rate,dependant on the load sensed. Used for e.g. bow and stern thrusters.
|
|
Solenoid control unit (24 volt) for bow and stern thrusters.
|
|
Solenoid control unit (24 volt) with counterbalance, for e.g. mast lowering, hinged radar support (or any other hydraulic cylinder for numerous applications).
|
|
Capacity: 2.75 cu.inch (45 cc)
Sense of Rotation: Left Handed
Connection: SAE-B Flange
13 Spine Shaft
Rear Connection...
|
|
Solenoid control unit (24 volt) for use with a hydraulically powered steering system or an automatic pilot.
|
|
Single step solenoid control unit (24 volt) for use with anchor windlasses.
|
|
Dual step solenoid control unit (24 volt) for use with anchor windlasses.
|
|
Solenoid control unit (24 volt) for use with a set of stabilizers
|
|
an extension of the basic block necessary if more than 5 solenoid control devices are required.
|
|
Capacity: 2.75 cu.inch (45 cc)
Sense of rotation: left handed.
Connection: SAE-B flange, 13 spline shaft. Rear connection for suction and pressure. Fits VETUS DEUTZ engines and ...
|
|
Capacity: 2.75 cu.inch (45 cc)
Sense of Rotation: Left Handed
Connection: SAE-B Flange
13 Spine Shaft
Rear Connection...
|
|
Capacity: 1.83 or 2.75 cu.inch (30 or 45 cc)
Sense of rotation: left handed.
Connection:SAE-B flange, 13 spline shaft. Rear connection for suction and pressure. Fits PRM gearboxe...
|
|
Capacity: 1.83 or 2.75 cu.inch (30 or 45 cc)
Sense of rotation: left handed.
Connection:SAE-B flange, 13 spline shaft. Rear connection for suction and pressure. Fits PRM gearbo...
|
|
Capacity: 2.75 cu.inch (45 cc)
Sense of Rotation: Left Handed
Connection: SAE-B Flange
13 Spine Shaft
Rear Connec...
|
|
Capacity: 1.83 or 2.75 cu.inch (30 or 45 cc)
Sense of rotation: right handed.
Connection:SAE-B flange, 13 spline shaft. side connection for suction and pressure. Fits Twindisc ...
|
|
Capacity: 1.83 or 2.75 cu.inch (30 or 45 cc)
Sense of rotation: right handed.
Connection:SAE-B flange, 13 spline shaft. side connection for suction and pressure. Fits Twindis...
|
|
Capacity: 2.75 cu.inch (45 cc)
Sense of Rotation: Left Handed
Connection: SAE-B Flange
13 Spine Shaft
Rear Connection...
|
|
Capacity: 4.57 cu.inch (75 cc)
Sense of rotation: left handed.
Connection:SAE-C flange, 14 spline shaft. side connection for suction and pressure. Fits Twindisc gearboxes.
...
|
|
VETUS power steering can be connected to an existing on board hydraulic system. However, if one is not fitted and only power steering is required, this small hydraulic tank (contai...
|
|
Although the engine manufacturer will often supply the hydraulic pump, VETUS can also offer a fixed volume hydraulic pump, which is belt driven off the main engine.
This VETUS ha...
|
|
VETUS HT5034
|
|
VETUS HTANK
|
|
Capacity:1.21 cu.inch/rev
Number of pistons:5
Weight without valve:8.2 lbs.
Weight with valve: 10.4 lbs.
Compatibility with:
MTC 30:
Max T...
|
|
Capacity:1.21 cu.inch/rev
Number of pistons:5
Weight without valve:8.2 lbs.
Weight with valve: 10.4 lbs.
Compatibility with:
MTC 30:
Max Torque:21...
|
|
HTP 2010R
Capacity: 1.21 cu.inch/rev
Number of pistons: 5
Weight: 9 lbs.
|
|
Capacity:1.83 cu.inch/rev
Number of pistons:5
Weight without valve:9 lbs.
Weight with valve: 11.3 lbs.
Compatibility with:
MTC 30
...
|
|
Capacity:1.83 cu.inch/rev
Number of pistons:5
Weight without valve:9 lbs.
Weight with valve: 11.3 lbs.
Compatibility with:
MTC 30
Max Torq...
|
|
HTP 3010R
Capacity: 1.83cu.inch.rev
Number of pistons: 5
Weight: 9 lbs.
|
|
Capacity: 2.56 cu.inch/rev
Number of pistons:7
Weight without valve: 9 lbs.
Weight with valve: 11.3 lbs.
Compatibility with:
MTC 30
of v...
|
|
Capacity: 2.56 cu.inch/rev
Number of pistons:7
Weight without valve: 9 lbs.
Weight with valve: 11.3 lbs.
Compatibility with:
MTC 30
of very com...
|
|
HTP 4210R
Capacity: 2.56 cu.inch/rev
Number of pistons:7
Weight: 9 lbs.
|
|
A special filter cap kit is available as an option, for use with the tilting steering type pumps HTPT. With this kit is is possible to position the filter cap in a convenient locat...
|
|
Components of a Hydraulic Engine Remote Control.
|
|
VETUS HYLIFT (HL) Electro-Hydraulic Hatch Lift
|
|
Interface Card For Auto-Synchronisation Of Two Engines.
|
|
Interface card for electrical control of throttle and/or gearshift.
|
|
VETUS IV150012 Remote Control Panel
|
|
VETUS IV200012 Sine Wave Inverters
|
|
VETUS IVPS Automatic Change-Over Device
1.Shore Supply
2. Generator
3. Inverter
4. Automatic Change-Over Device
5. Remote Control Panel
6. Battery
7. Consumers
(Numbers...
|
|
VETUS JER316R Stainless Steel Cowl Ventilators
|
|
VETUS JER316WR Stainless Steel Cowl Ventilators
|
|
VETUS JERRY2 Cowl Ventilators
|
|
VETUS JERRYS Plastic Cowl Ventilators
|
|
VETUS KA Steering Wheel
|
|
VETUS KB Steering Wheel
|
|
VETUS KC Steering Wheel
|
|
VETUS KEY for Stainless Steel Deck Entries
|
|
VETUS KRA Nickel Plated Brass 3-way Full Bore Brass Valves
|
|
VETUS KRRAN Nickel Plated Brass Full Bore Ball Valves
|
|
Steering wheel type KS 32 and KS 36, suitable for steering outboard motors with a maximum output of up to 40 kW.
|
|
Steering wheel type KS 32 and KS 36, suitable for steering outboard motors with a maximum output of up to 40 kW.
|
|
VETUS KS 38 Steering Wheel
|
|
VETUS KS 45 Steering Wheel
|
|
VETUS KS 55
|
|
VETUS KW 38 Steering Wheel
|
|
VETUS KW 45 Steering Wheel
|
|
VETUS KW 55 Steering Wheel
|
|
VETUS KWL 38 Steering Wheel
|
|
VETUS KWL 45 Steering Wheel
|
|
VETUS KWL 55 Steering Wheel
|
|
VETUS Lead-Calcium Type Batteries
|
|
VETUS LEVANTER Cowl Ventilators
|
|
This model is supplied with a hose connector with a diameter of 1&9/16" which can rotate through 360 degrees and have a capacity of 1.85 gallons. The cooling water drainpipe has a ...
|
|
This model is supplied with a hose connector with a diameter of 1&3/4" which can rotate through 360 degrees and have a capacity of 1.85 gallons. The cooling water drainpipe has ...
|
|
This model is supplied with a hose connector with a diameter of 2" which can rotate through 360 degrees and have a capacity of 1.85 gallons. The cooling water drainpipe has a di...
|
|
Comes with stainless steel mounting bracket with synthetic straps.
|
|
Comes with stainless steel mounting bracket with synthetic straps.
|
|
Escape, Deck and Ventilation Hatches
Libero hatches with hand-polishedand anodizd aluminum fames, 11/4" or 23/16" conerradius and with 1/2" "smoke" colored acrylic lid.
|
|
Escape, Deck and Ventilation Hatches
|
|
Escape, Deck and Ventilation Hatches
Libero hatches with hand-polishedand anodizd aluminum fames, 11/4" or 23/16" conerradius and with 1/2" "smoke" colored acrylic lid.
|
|
Escape, Deck and Ventilation Hatches
Libero hatches with hand-polishedand anodizd aluminum fames, 11/4" or 23/16" conerradius and with 1/2" "smoke" colored acrylic lid.
|
|
Escape, Deck and Ventilation Hatches
Libero hatches with hand-polishedand anodizd aluminum fames, 11/4" or 23/16" conerradius and with 1/2" "smoke" colored acrylic lid.
|
|
Escape, Deck and Ventilation Hatches
Libero hatches with hand-polishedand anodizd aluminum fames, 11/4" or 23/16" conerradius and with 1/2" "smoke" colored acrylic lid.
|
|
Escape, Deck and Ventilation Hatches
Libero hatches with hand-polishedand anodizd aluminum fames, 11/4" or 23/16" conerradius and with 1/2" "smoke" colored acrylic lid.
|
|
Escape, Deck and Ventilation Hatches
Libero hatches with hand-polishedand anodizd aluminum fames, 11/4" or 23/16" conerradius and with 1/2" "smoke" colored acrylic lid.
|
|
Escape, Deck and Ventilation Hatches
|
|
This ventilation box with hose connections fits to the aluminum louvred air vent type ASV100 which should be ordered separately. However, it cannot be used with the stainless steee...
|
|
In order for a marine diesel engine to function properly, it needs sufficient air.
The frame is made of polished anodised aluminum and the grilles of naturally anodised alumi...
|
|
In order for a marine diesel engine to function properly, it needs sufficient air.
The frame is made of high gloss stainless steel (AISI 316) and the grilles of naturally ano...
|
|
In order for a marine deisel engine to function properly, it needs sufficient air. The frame and grilles are made of high gloss polished stainless steel (AISI 316).
|
|
Gooseneck exhaust system.
|
|
Gooseneck exhaust system.
|
|
Gooseneck exhaust system.
|
|
Gooseneck exhaust system.
|
|
Gooseneck exhaust system.
|
|
Technical Data
Voltage: 12 and 24 V D.C.
power consumption, stand by: +/-10 mA
Maximum load per wiper motor:120 W
Internal fuses: 10A each for each wiper motor, 5 A for the...
|
|
Technical Data
Voltage: 12 and 24 V D.C.
power consumption, stand by: +/-10 mA
Maximum load per wiper motor:120 W
Internal fuses: 10A each for each wiper motor, 5 A for the...
|
|
Oil-Cooled Marine Diesel Engine.
|
|
Marine Diesel 4 Cylinder Engine
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine 2.600 RPM.
|
|
Marine Diesel 4 Cylinder Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel 6 Cylinder Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Marine Diesel Engine.
|
|
Top-mounting single lever remote
|
|
VETUS single lever remote control for side mounting, with stainless steel handle and housing.
|
|
Top-mounting for 2 engines
|
|
Vetus Single Lever Remote Control
|
|
Capacity approximately 34.3 gallons.
|
|
Capacity approximately 34.3 gallons.
|
|
Capacity approximately 34.3 gallons.
|
|
Capacity of approximately 6.1 gallons.
|
|
Capacity of approximately 6.1 gallons.
|
|
Capacity of approximately 6.1 gallons.
|
|
Capacity approximately 19.8 gallons.
|
|
Capacity approximately 19.8 gallons.
|
|
Capacity approximately 19.8 gallons.
|
|
VETUS MISTRAL Cowl Ventilator
|
|
VETUS MISTRAL Cowl Ventilators
|
|
VETUS MP10B12 Engine Instrument Panels
|
|
VETUS MP21BN12A Engine Instrument Panel
|
|
VETUS MP21BS12A Engine Instrument Panels
|
|
VETUS MP34BN12A Engine Instrument Panel
|
|
VETUS MP34BN12A Engine Instrument Panels
|
|
VETUS MP34BS12A Engine Instrument Panels
|
|
VETUS MP34BS24A Engine Instrument Panels
|
|
Technical Date Cylinders
Max Torque at 35 degree rudder angle: 11772 Nm (1200kgm), 8683 lbs.
Cylinder stroke: 15 3/4"
Max. pressure: 161 cu.inch
Cylinder Volume: 13 25/32" ...
|
|
Technical Date Cylinders
Max Torque at 35 degree rudder angle: 2207 Nm (225 kgm), 1628 lbs.
Cylinder stroke:7 7/8"
Max. pressure: 6178 kPa
Cylinder Volume: 30 1/2 cu.i...
|
|
Technical Date Cylinders
Max Torque at 35 degree rudder angle:3335 Nm (340 kgm), 2460 lbs.
Cylinder stroke:11 11/16"
Max. pressure: 6178 kPa
Cylinder Volume:45 40/60"
...
|
|
Technical Date Cylinders
Max Torque at 35 degree rudder angle:
Cylinder stroke:4415 Nm (600 kgm) 3562 ft. lbs.
Max. pressure: 6178 kPa
Cylinder Volume: 61 cu.inch
To...
|
|
Technical Date Cylinders
Max Torque at 35 degree rudder angle: 5886
Cylinder stroke: 7 7/8"
Max. pressure: 6178 kPa
Cylinder Volume: 80 1/2 cu.inch
Total rudder an...
|
|
Technical Date Cylinders
Max Torque at 35 degree rudder angle: 8829 Nm (900 kgm), 8683 ft. lbs.
Cylinder stroke: 11 13/16"
Max. pressure: 6178 kPa
Cylinder Volume: ...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless steel ...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless steel ...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a waterlock and/or gooseneck. Comes with stainless ste...
|
|
VETUS MWHOSE Cooling Water Hose
|
|
This beautiful new VETUS anchor windlass is made of cast stainless steel, type AISI 316. The housing, cover and drum are all high-gloss polished and the overall appearance is sturd...
|
|
Gipsy
The Napoleon anchor windlass may be supplied with three different gipsies. When ordering, please indicate the size required.
1. 8 mm DIN 766; 8 mm ISO 4565; 5/16" HY, 5/...
|
|
VETUS NSF No-Smell Filters for Toilet Waste Tanks ("Black Water")
|
|
Attention: diesel fuel and froth must NOT enter into the filter housing and its element. It is therefore imperative that the no-smell filter is installed in combination with the VE...
|
|
Attention: diesel fuel and froth must NOT enter into the filter housing
and its element. It is therefore imperative that the no-smell filter is
installed in combination with the VE...
|
|
VETUS NSFS No Smell Filters for Toilet Waste Tanks (Black Water)
Model NSFS is suitable for O 5/8" vent hose only
|
|
OBC 150
Maximum rudder torque: 474 ft. lbs.
Volume: 6.6 cu.inch
Maximum output: 110 kW (150 hp)
Maximum speed: 85 km/h (45 knots)
*The cylinder moves over the pist...
|
|
OBC 125
Maximum rudder torque:474 ft. lbs.
Volume: 6.6 cu.inch
Maximum output: 90 kW (125 hp)
Maximum speed: 85km/h (45 knots)
*The piston rod moves inside th...
|
|
OBC 225
Maximum rudder torque: 757 ft. lbs.
Volume: 10.5 cu.inch
Maximum output: 165 kW (225 hp)
Maximum speed: 85 km/h (45 knots)
*The piston rod moves inside the ...
|
|
OBC 275
Maximum rudder torque: 583 ft. lbs.
Volume: 8.06 cu.inch
Maximum output: 220 kW (300 hp)
Maximum speed: 110 km/h (60 knots)
*the cylinder moves over the piston ro...
|
|
Technical Details
Electrical supply : 12 Volt DC
Maximum current consumption : 2A
Length of drive shaft : 3 1/2"
Maximum wall thickness : 3/4"
Single speed and sel...
|
|
Made of manganese bronze. Suited to "displacement" craft with speeds of up to 10 knots.
|
|
Made of manganese bronze. Suited to "displacement" craft with speeds of up to 10 knots.
|
|
Made of manganese bronze. Made of manganese bronze. Suited to "displacement" craft with speeds of up to 10 knots.
|
|
Made of manganese bronze. Suited to "displacement" craft with speeds of up to 10 knots.
|
|
Made of manganese bronze.
|
|
Made of manganese bronze. Suited to "displacement" craft with speeds of up to 10 knots.
|
|
Made of manganese bronze. Suited to "displacement" craft with speeds of up to 10 knots.
|
|
Made of manganese bronze. Suited to fast craft with speeds of more than 16 knots.
|
|
Made of manganese bronze. Suited to fast craft with speeds of more than 16 knots.
|
|
Made of manganese bronze. Suited to fast craft with speeds of more than 16 knots.
|
|
Made of manganese bronze. Suited to fast craft with speeds of more than 16 knots.
|
|
Made of manganese bronze. Suited to fast craft with speeds of more than 16 knots.
|
|
Made of manganese bronze. Suited to fast craft with speeds of more than 16 knots.
|
|
Made of manganese bronze. Suited to "semi-planning" boats with speeds of up to 16 knots.
|
|
Made of manganese bronze. Suited to "semi-planning" boats with speeds of up to 16 knots.
|
|
Made of manganese bronze. Suited to "semi-planning" boats with speeds of up to 16 knots.
|
|
Made of manganese bronze. Suited to "semi-planning" boats with speeds of up to 16 knots.
|
|
Made of manganese bronze. Suited to "semi-planning" boats with speeds of up to 16 knots.
|
|
Suitable for 24 Volt electric bow and stern thrusters.
Suitable for 12 and 24 Volt engine electric systems.
Analogous propulsion engine control.
control actuators...
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Escape, Deck and ventilation hatches type Planus
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Hand-polished and anodized aluminum porthole.
|
|
Stainless steel porthole.
|
|
Stainless steel porthole.
|
|
Stainless steel porthole.
|
|
Stainless steel porthole.
|
|
Stainless steel porthole.
|
|
Hand-polished and anodized aluminum frames.
|
|
Hand-polished and anodized aluminum frames.
|
|
Hand-polished and anodized aluminum frames.
|
|
Hand-polished and anodized aluminum frames.
|
|
Hand-polished and anodized aluminum frames.
|
|
Hand-polished and anodized aluminum frames.
|
|
Hand-polished and anodized aluminum frames.
|
|
Hand-polished and anodized aluminum frames.
|
|
Stainless steel with Acrylic window pane.
|
|
Stainless steel with Acrylic window pane.
|
|
Stainless steel with Acrylic window pane.
|
|
Fiberglass reinforced nylon porthole.
|
|
VETUS President Boat Seats
|
|
VETUS PRO Series Type "P" Steering Wheel
|
|
VETUS PRO Series Type "T" Steering Wheel
|
|
For steel vessels.
|
|
For steel vessels.
|
|
For steel vessels.
|
|
For steel vessels.
|
|
For steel vessels.
|
|
For steel vessels.
|
|
For G.R.P. or wooden vessels.
|
|
For G.R.P. or wooden vessels.
|
|
For G.R.P. or wooden vessels.
|
|
For G.R.P. or wooden vessels.
|
|
A propeller nut with integrated zinc anode comes as standard with the propeller shafts.
|
|
A propeller nut with integrated zinc anode comes as standard with the propeller shafts.
|
|
Specially developed for steel craft.
|
|
Specially developed for steel craft.
|
|
Specially developed for steel craft.
|
|
Specially developed for steel craft.
|
|
A mid range cable that is recommended for shorter and simpler cable runs.
|
|
Low Friction high quality multi-strand wire core for superb strength and flexibility.
|
|
VETUS Recon Electric Remote Control
|
|
VETUS REMC01 Radio Remote Control
This remote control is also suitable to operate other electrically
driven equipment on board. Additional hand held controls (transmitters)
ar...
|
|
VETUS REMC02 Radio Remote Control
This remote control is also suitable to operate other electrically driven equipment on board. Additional hand held controls (transmitters) ar...
|
|
Single lever control handle for one engine (Throttle and gearshift).
|
|
Single lever control handle for two enginea (Throttle and gearshift) (2).
|
|
VETUS RESTFS Adjustable and Revolving Foot Rest
|
|
VETUS RFU1718 Rudder Position Indicators
|
|
VETUS RING Cowl Ventilator Rings
|
|
In order for a marine diesel engine to function properly, it needs sufficient air.
|
|
VETUS RPI1700 Rudder Position Indicators
|
|
VETUS RT Angled Fittings
|
|
VETUS RUDS 4040 Rudder
|
|
VETUS RUDS 5040 Rudder
|
|
Dimensions
Height: 3.7" X 3.7" X 0.6"
Built in depth of 1.2"
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and ...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and ...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and ...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked that the combination of arm length, blade length, and w...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and ...
|
|
Plastic cover for VETUS wiper motor type RWS
Complete with bottom plate
|
|
These VETUS wiper motors (Type RWS) are two speed and self parking.The
drive shaft of these motors is made of stainless steel.
These VETUS wiper motors may be supplied with a...
|
|
VETUS marine hoses fulfill all current legislation for use on board. On
top of that, they are highly flexible and resistant against a variety
of internal or external influences.
|
|
Technical Specifications:
Available for 12 and 24 volt DC or 230 Volt/50 Hz or 120 Volt/60 Hz
Macerator diameter: 3 7/8"
Nominal Power consumption: approx. 370 W (...
|
|
VETUS SCIROCCO Stainless Steel Shell Ventilators
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
For installation directly to the propeller shaft. These shaft anodes are provided with cast-in metal clamps, which ensure longer life of the anode, prevent early loss of material a...
|
|
Shut-Off Control Type DC
|
|
VETUS single lever remote control for side mounting, with stainless steel (AISI 316) handle and housing.
|
|
Single Steering Position
One steering pump with or without built-in non-return valves,
One Cylinder,
Hydraulic Tubing,
(plus accessory fittings, as required).
Hydraulic f...
|
|
VETUS SLANG Rubber Exhaust Phone
In order to reduce back pressure in the engine, the inside of all VETUS exhaust hoses is completely flush and smooth.
Available with an i...
|
|
VETUS SLKL Stainless Steel Hose Clamps
|
|
VETUS SLP Brass Hose Pillars
|
|
VETUS SLR Clear View Screens
|
|
VETUS SLVBG Plastic Hose Connections
|
|
VETUS SLVBR Plastic Hose Connections
|
|
The Electronic Control Panel
The panel controls three functions: Economic flush, Normal flush, and Discharge only.
It is supplied completely pre-wired and terminates with a ...
|
|
VETUS SOL1512D Make/Break Relay
|
|
VETUS SOL1512S
|
|
VETUS SOL324D Make/Break Relay
|
|
VETUS SOL324S Make Relay
|
|
Fulfils the requirements of the ISO 4589 standard.
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and...
|
|
Suitable combination of arm, blade, and wiping angle
In order not to overload the RWS type wipe monitor, it must be checked
that the combination of arm length, blade length, and...
|
|
VETUS ST04 Air Vent Nipples for Tanks
|
|
VETUS STO4H Air Vent Nipples for Tanks
|
|
VETUS ST04HS Air Vent Nipples for Tanks
|
|
VETUS ST04S Air Vent Nipples for Tank
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VETUS Strip Fuses
|
|
VETUS TANKV Flexible Tanks for Toilets and Waste Water
|
|
VETUS TANKW Flexible Water Tanks
|
|
VETUS TCR60 Removable Table Leg
|
|
As the battery temperature increases, the charging voltage should be reduced, in order to prevent water loss from the battery. An optional temperature sensor may be connected to an...
|
|
VETUS THRU Stainless Steel Through-Hull Fittings
|
|
VETUS THRUB Bronze Through-Hull Fittings
|
|
Hydraulic motor: suitable to operate in both directions
Capacity hydraulic motor (cu.inch/rev): 0.5
Maximum operating pressure, psi: 1653
Maximum intermittent motor speed:...
|
|
VETUS Tiger Electric Anchor Windlass
|
|
VETUS TOM2 Cowl Ventilators
|
|
VETUS TOM316R Stainless Steel Cowl Ventilator
|
|
VETUS TOM316WR Stainless Steel Cowl Ventilator
|
|
VETUS TOMS Plastic Cowl Ventilators
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of EDPM rubber can easily and flexibly be mounted to the transom.
|
|
Made of EDPM rubber can easily and flexibly be mounted to the transom.
|
|
Made of EDPM rubber can easily and flexibly be mounted to the transom.
|
|
Made of EDPM rubber can easily and flexibly be mounted to the transom.
|
|
Made of EDPM rubber and can easily and flexibly be mounted to the transom.
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of plastic.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Made of stainless steel AISI 316.
|
|
Extraction ventilator for engine rooms for installation into blower hose with an internal diameter of 3". Hose may also be connected to Scirocco Shell ventilators.
|
|
For installation into blower hose with an internal diameter of 3".
|
|
100% concentric fit!
|
|
VETUS Type Asterix : Hinged High Gloss-Polished Stainless Steel Bow Roller
|
|
Designed to ensure optimum damping of vibrations. The Bullflex coupling is secured against radially and axially shearing off. This ensures a safe transmission under all circumstanc...
|
|
Designed to ensure optimum damping of vibrations. The Bullflex coupling is secured against radially and axially shearing off. This ensures a safe transmission under all circumstanc...
|
|
Designed to ensure optimum damping of vibrations. The Bullflex coupling is secured against radially and axially shearing off. This ensures a safe transmission under all circumstanc...
|
|
Designed to ensure optimum damping of vibrations. The Bullflex coupling is secured against radially and axially shearing off. This ensures a safe transmission under all circumstanc...
|
|
Designed to ensure optimum damping of vibrations. The Bullflex coupling is secured against radially and axially shearing off. This ensures a safe transmission under all circumstanc...
|
|
Designed to ensure optimum damping of vibrations. The Bullflex coupling is secured against radially and axially shearing off. This ensures a safe transmission under all circumstanc...
|
|
Designed to ensure optimum damping of vibrations. The Bullflex coupling is secured against radially and axially shearing off. This ensures a safe transmission under all circumstanc...
|
|
VETUS Type Ed : Fixed High Gloss-Polished Stainless Steel Bow Roller
|
|
These engine mountings are standard supply with the VETUS marine diesel engines VH 4.65 and VH 4.80 and are generally mountings for heavy-weight engines with 4 or more cylinders.
|
|
These engine mountings are standard supply with the VETUS marine diesel engines VH 4.65 and VH 4.80 and are generally mountings for heavy-weight engines with 4 or more cylinders...
|
|
These engine mountings are standard supply with the VETUS marine diesel engines VH 4.65 and VH 4.80 and are generally mountings for heavy-weight engines with 4 or more cylinders...
|
|
These engine mountings are standard supply with the VETUS marine diesel engines M 2.C5 AND M 2.D5.
|
|
These flexible engine mountings are especially designed for 3-cylinder marine diesel engines and are standard supply with the VEUS marine diesel engine model M3.28. They also ab...
|
|
For smaller engines up to Approximately 60 kW (80 HP).
|
|
For smaller engines up to Approximately 60 kW (80 HP).
|
|
For smaller engines up to Approximately 60 kW (80 HP).
|
|
These vibration dampers are standard supply with the VETUS marine diesel engines model DT44 and above. These flexible engine mountings are suitable for marine diesel engines in ...
|
|
These vibration dampers are standard supply with the VETUS marine diesel engines model DT44 and above. These flexible engine mountings are suitable for marine diesel engines in ...
|
|
These vibration dampers are standard supply with the VETUS marine diesel engines model DT44 and above. These flexible engine mountings are suitable for marine diesel engines in ...
|
|
These vibration dampers are standard supply with the VETUS marine diesel engines model DT44 and above. These flexible engine mountings are suitable for marine diesel engines in ...
|
|
These engine mountings are standard supply with the VETUS marine diesel engine M 2.06.
|
|
VETUS Type Obelix : Hinged High Gloss-Polished Stainless Steel Bow Roller
|
|
VETUS Type P12CB Switch Panel
*Automatic fuses
VETUS Switch Panels are supplied pre-wired. the only work required is
to connect the positive and negative feeds and the va...
|
|
VETUS Type P12F Switch Panel
*tubular glass fuses
VETUS Switch Panels are supplied pre-wired. the only work required is to connect the positive and negative feeds and the vario...
|
|
VETUS P6CB Switch Panel
*Automatic fuses
|
|
VETUS Type P6 Switch Panels
*tubular glass fuses
|
|
VETUS Type P8F Switch Panel
|
|
VETUS Type Polly and Francis : Fixed High Gloss-Polished Stainless Steel Bow Roller
|
|
For exact alignment and concentric installation of a propeller shaft in a boat. These couplings are axially and radially secured against shearing off.
|
|
For exact alignment and concentric installation of a propeller shaft in a boat. These couplings are axially and radially secured against shearing off.
|
|
VETUS TYPHOON Stainless Steel Shell Ventilators
|
|
Permanent Ventilators Type UFO and UFO-TRANS
(Stainless Steel, AISI 316)
These models are made of Stainless Steel and they cannot be closed, so that they will ensure permanent...
|
|
Permanent Ventilators Type UFO and UFO-TRANS
(Stainless Steel, AISI 316)
These models are made of Stainless Steel and they cannot be closed, so
that they will ensure per...
|
|
VETUS UFO2 Closing Deck Ventilators
|
|
Universal servo motor, for mechanically controlling either the throttle or the gearshift (4) RECOACT
Universal servo motor, for mechanically controlling either the throttle or the gearshift (4).
|
|
VETUS Ursus Electric Anchor Windlass
|
|
VETUS VALVE38 Three Way Ball Valve
|
|
Hose connection with mounting bracket allows for optional in-line mounting.
|
|
Extraction ventilator which complies with ISO 9097 Marine Standard.
|
|
Extraction ventilator for engine room which complies with ISO 9097 Marine Standard.
|
|
Installation of a security system on your boat may reduce your insurance premium. Check with your insurance company!
This system functions on 12 VDC or 24 VDC supplies. They ...
|
|
Installation of a security system on your boat may reduce your insurance premium. Check with your insurance company!
This system functions on 12 VDC or 24 VDC supplies. They ...
|
|
VETUS Hydraulic Oil HT
|
|
VETUS Hydraulic Steering Oil HF 15
|
|
VETUS Marine Diesel Engine Oil
|
|
VETUS Marine Diesel Synthetic Engine Oil 10W-40
|
|
VETUS Organic Coolant - 38
|
|
Top mounting single lever remonte control.
|
|
Top-Mounting for 2 Engines
|
|
VETUS Special Gearbox Oil
|
|
VETUS Transmission Oil
VETUS Transmission Oil is suitable for all types of marine transmissions which specify Automatic Transmission Fluids (ATF), Dextron IID, or ATF Suffix A. T...
|
|
For shafts with diameter of 1" and stern tubes with inside diameter of 1&1/2".
|
|
For shafts with diameter of 1&1/2" and stern tubes with inside diameter of 2".
|
|
For shafts with diameter of 1&1/4" and stern tubes with inside diameter of 1&3/4".
|
|
For shafts with diameter of 1&1/8" and stern tubes with inside diameter of 1&5/8".
|
|
For shafts with diameter of 1&3/4" and stern tubes with inside diameter of 2&3/8".
|
|
For shafts with diameter of 1&3/8" and stern tubes with inside diameter of 1&7/8".
|
|
Available by special order. For shafts with diameter of 1&5/8" and stern tubes with inside diameter of 2&1/8".
|
|
For shafts with diameter of 100 mm and stern tubes with inside diameter of 125 mm.
|
|
For shafts with diameter of 2" and stern tubes with inside diameter of 2&5/8".
|
|
For shafts with diameter of 2&1/2" and stern tubes with inside diameter of 3&1/4".
|
|
For shafts with diameter of 2&1/4" and stern tubes with inside diameter of 3".
|
|
For shafts with diameter of 2&3/4" and stern tubes with inside diameter of 3&1/2".
|
|
Available by special order. For shafts with diameter of 20 mm and stern tubes with inside diameter of 1&1/4".
|
|
Available by special order For shafts with diameter of 22 mm and stern tubes with inside diameter of 1&1/4".
|
|
For shafts with diameter of 25 mm and stern tubes with inside diameter of 1&1/2 ".
|
|
For shafts with diameter of 25 mm and stern tubes with inside diameter of 40 mm.
|
|
For shafts with diameter of 3" and stern tubes with inside diameter of 4".
|
|
For shafts with diameter of 3&1/2" and stern tubes with inside diameter of 4&1/2".
|
|
For shafts with diameter of 30 mm and stern tubes with inside diameter of 1&3/4".
|
|
For shafts with diameter of 30 mm and stern tubes with inside diameter of 45 mm.
|
|
For shafts with diameter of 35 mm and stern tubes with inside diameter of 1&3/8".
|
|
For shafts with diameter of 35 mm and stern tubes with inside diameter of 50 mm.
|
|
For shafts with diameter of 4" and stern tubes with inside diameter of 5".
|
|
For shafts with diameter of 40 mm and stern tubes with inside diameter 2&1/8.
|
|
For shafts with diameter 45 mm and stern tubes with inside diameter of 2&3/8".
|
|
For shafts with diameter of 45 mm and stern tubes with inside diameter of 65 mm.
|
|
For shafts with diameter 50 mm and stern tubes with inside diameter of 2&5/8".
|
|
For shafts with diameter of 50 mm and stern tubes with inside diameter of 70 mm.
|
|
Available by special order. For shafts with diameter of 55 mm and stern tubes with inside diameter of 2&7/8".
|
|
For shafts with diameter of 60 mm and stern tubes with inside diameter of 3".
|
|
For shafts with diameter of 60 mm and stern tubes with inside diameter of 80 mm.
|
|
Available by special order. For shafts with diameter of 65 mm and stern tubes with inside diameter of 3&1/4".
|
|
For shafts with diameter of 70 mm and stern tubes with inside diameter of 4".
|
|
For shafts with diameter of 70 mm and stern tubes with inside diameter of 90 mm.
|
|
For shafts with diameter of 80 mm and stern tubes with inside diameter of 4".
|
|
For shafts with diameter of 80 mm and stern tubes with inside diameter of 100 mm.
|
|
For shafts with diameter of 90 mm and stern tubes with inside diameter of 110 mm.
|
|
Available for exhaust hoses with inside diameter of 3&1/2".
|
|
Available for exhaust hoses with inside diameter of 4".
|
|
Available for exhaust hoses with inside diameter of 5".
|
|
Available for exhaust hoses with inside diameter of 6".
|
|
Separates water and dirt particles from fuel.
|
|
Separates water and dirt particles from fuel.
|
|
Separates water and dirt particles from fuel.
|
|
Separates water and dirt particles from fuel.
|
|
VETUS VRF Vacuum Operated Vent Valve
|
|
VETUS Waste Water Tanks
|
|
Inside Diameter: 1/2"
Outside Diameter: 29/32"
Inside Diameter: 5/8"
Outside Diameter: 1 1/16"
|
|
For use with less powerful engines, theses shaft assemblies protect the environment which eliminates the need fo a stuffing box. Thes propeller shaft assemblies also feature a prop...
|
|
For use with less powerful engines, theses shaft assemblies protect the environment which eliminates the need fo a stuffing box. Thes propeller shaft assemblies also feature a prop...
|
|
VETUS Water Separator/Fuel Filter(s)
|
|
Connector Pipe.
|
|
A more efficient, sophisticated design, exhaust system.
|
|
Capactiy of 4&1/2 gallons. Comes with check valve and two securing straps.
|
|
Capactiy of 4&1/2 gallons. Comes with check valve and two securing straps.
|
|
Capactiy of 4&1/2 gallons. Comes with check valve and two securing straps.
|
|
Capacity approximately 4.23 gallons. Comes with two securing straps.
|
|
Capacity approximately 4.23 gallons. Comes with two securing straps.
|
|
Capacity approximately 4.23 gallons. Comes with two securing straps.
|
|
Capacity of approximately 2 gallons. Comes with one securing strap.
|
|
Capacity of approximately 2 gallons. Comes with one securing strap.
|
|
Capacity of approximately 2 gallons. Comes with one securing strap.
|
|
Installation of the exhaust assembly even in confined engine spaces is greatly simplified since the top chamber may be rotates through 360 degrees and both the inlet and the out...
|
|
Installation of the exhaust assembly even in confined engine spaces is greatly simplified since the top chamber may be rotates through 360 degrees and both the inlet and the out...
|
|
VETUS WBB Wiper Blades
|
|
VETUS WBS Wiper Blades
|
|
VETUS WCAP Brass Water Scoops
|
|
VETUS WCAP..S Stainless Steel Water Scoops
|
|
VETUS WCAPB Bronze Water Scoops
|
|
VETUS WCL Electronic Toilets
|
|
VETUS WCS Electronic Toilet
|
|
VETUS marine hoses fulfill all current legislation for use on board. On
top of that, they are highly flexible and resistant against a variety
of internal or external influences.
|
|
Capacity of 1.05 gallons. Made of synthetic materials.
|
|
Capacity of 1.05 gallons. Made of synthetic materials.
|
|
Capacity of 1.05 gallons. Made of synthetic materials.
|
|
Capacity of 0.6 gallons. Made of synthetic materials.
|
|
Capacity of 2.77 gallons. Made of synthetic materials.
|
|
Capacity of 2.77 gallons. Made of synthetic materials.
|
|
Capacity of 2.77 gallons. Made of synthetic materials.
|
|
Capacity of 2.77 gallons. Made of synthetic materials.
|
|
Gooseneck exhaust system.
|
|
Gooseneck exhaust system.
|
|
Gooseneck exhaust system.
|
|
Gooseneck exhaust system.
|
|
This sensor may be connected to any type of wind instrument with a NMEA0183 input
The instrument gives digital read out of wind speed and both digital and analogue indication ...
|
|
VETUS WTANK Water Tank
|
|
VETUS WTIKIT Inspection Lid
|
|
VETUS WTKIT Connection Kit
|
|
VETUS WTS Extraction Pipes
|
|
Technical Specifications:
Voltage: 12 V or 24 Volt DC
Voltage Drain, stand by: 4-mA
Maximum current consumption of electric pump: 10 A
Maximum current consumption of valve: 5 A...
|
|
VETUS marine hoses fulfill all current legislation for use on board. On
top of that, they are highly flexible and resistant against a variety
of internal or external influences.
...
|
|
VETUS WWS Waste Water Tank System
|
|
VETUS WWW Bulkhead Mounted Waste Water Tanks
|
|
A blockage in the engine water intake or a damaged pump impeller will result in complete loss, or severe reduction in the volume of cooling water in the exhaust system. This causes...
|
|
A blockage in the engine water intake or a damaged pump impeller will result in complete loss, or severe reduction in the volume of cooling water in the exhaust system. This causes...
|
|
A blockage in the engine water intake or a damaged pump impeller will result in complete loss, or severe reduction in the volume of cooling water in the exhaust system. This causes...
|
|
A blockage in the engine water intake or a damaged pump impeller will result in complete loss, or severe reduction in the volume of cooling water in the exhaust system. This causes...
|
|
VETUS XTPAN252A Extension Panel
|
|
VETUS XTPAN252A Extension Panel
|
|
VETUS YCONN Y-Connectors
|
|
VETUS YOG316R Stainless Steel Cowl Ventilator
|
|
VETUS YOG316WR Stainless Steel Cowl Ventilators
|
|
VETUS YOGl2 Cowl Ventilators
|
|
VETUS YOGlS Plastic Cowl Ventilators
|
|
When sailing on salt waters, the use of zinc anodes is recommended. Aluminum anodes are not recommended because they would be worn down and damaged much more quickly. The use o...
|
|
When sailing on salt waters, the use of zinc anodes is recommended. Aluminum anodes are not recommended because they would be worn down and damaged much more quickly. The use o...
|
|
When sailing on salt waters, the use of zinc anodes is recommended. Aluminum anodes are not recommended because they would be worn down and damaged much more quickly. The use o...
|
|
When sailing on salt waters, the use of zinc anodes is recommended. Aluminum anodes are not recommended because they would be worn down and damaged much more quickly. The use o...
|
|
When sailing on salt waters, the use of zinc anodes is recommended. Aluminum anodes are not recommended because they would be worn down and damaged much more quickly. The use o...
|
|
When sailing on salt waters, the use of zinc anodes is recommended. Aluminum anodes are not recommended because they would be worn down and damaged much more quickly. The use o...
|
